Big bore kit on aprilia rx 50?

im putting a 90cc bore cylinder kit on my aprilia rx 50 2010 and it has the stock carb will i need to get a bigger one?

Other answer:

taylor:
Do two things first-
Rejet the stock carb bigger and find a slightly free-er exhast. That may or may not work all that well but it is cheaper than replacing a bunch of other engine parts without trying too hard.
If you do get a bigger carb- port and polish the intake on the cylinder barrel.
Dáwñ:
no, but you'll need to rejet to 'smaller' jets probably since the higher displacement will create more vacuum signal .. see how you like it, power shouldnt be a problem, but if you need it to wind up higher for mostly top speed then a slightly bigger carb would likely be better ..
Bertsta:
No your bike is unlikely to be carb-restricted. Most likely you will run into ignition problems before the carnie becomes too small.
May:
Yea I defintly would it would have no power
Thomas:
Yea I defintly would it would have no power
Karen:
Yea I defintly would it would have no power
Tim:
Yea I defintly would it would have no power
Jason:
ya